2024 Free Pool Soda Ash Calculator for pH Increase
As an Amazon Associate, I earn from qualifying purchases.
Table of Contents
Pool Soda Ash Calculator
Please feel free to use the Pool Soda Ash Calculator below.
Enter the Existing pH Level and the Pool Water Volume (Gallons) to get the Soda Ash Dose (oz) to bring the pH Level to a healthy 7.5. (The calculator assumes a Total Alkalinity of 100 ppm and Borax of 0)
Pool Soda Ash Calculator
NOTE: Addition of Soda Ash increases both pH and Total Alkalinity (TA).
Importance of pH Level in Pool
Pool pH is a measure of how acidic or basic the pool water is. The recommended pH range for a pool is typically between 7.2 and 7.8.
This range ensures that your pool is safe for swimming, optimizes the effectiveness of the chlorine, and helps keep your pool clean and clear.
The ideal range would be between 7.4 and 7.6.
High pH levels can cause scaling on pool surfaces and equipment, cloudy water, and reduced effectiveness of chlorine.
On the other hand, low pH levels can corrode pool surfaces and equipment, irritate swimmers’ skin and eyes, and decrease the effectiveness of chlorine.
Role of Soda Ash in Increasing pH
Soda ash, also known as sodium carbonate or pH increaser, is used to raise the pH level of pool water. When added to pool water, soda ash works as a pH buffer, meaning it helps stabilize and increase the pH level.
Soda ash works by reacting with the acidic compounds in the water, such as carbon dioxide, to form carbonates. These carbonates act as alkaline buffers, which resist changes in pH when acids or bases are added to the water.
As a result, soda ash effectively raises the pH level of the pool water, bringing it into the optimal range for safe and enjoyable swimming.
Do you need access to all my Pool Chemical Calculators? Just click the button below:
The Best Soda Ash for Your Pool
Leslie’s Soda Ash pH Up is the best Soda Ash for increasing the pH and alkalinity level of your pool. You can order it from Amazon.
for Increasing pH and Total Alkalinity
- Granular soda ash
- Raises pH & alkalinity levels
- Quick dissolving
- Prevents damage to pool and irritation for swimmers
How to Add Soda Ash to Your Pool
Adding soda ash to your pool to increase pH and Alkalinity is quite simple. Here is how to add it.
• Test your pool and fill water: Measure pH and total alkalinity levels. Use the Pool Soda Ash Calculator here to arrive at the dosage. Don’t forget to wear safety glasses and gloves.
• Prepare the soda ash solution: Fill a bucket 3/4 full with pool water. Add the measured amount of soda ash (don’t exceed 15 lbs per bucket). Stir well until completely dissolved.
• Add solution to pool: Slowly pour the dissolved solution around the pool perimeter, avoiding the skimmer. Consider pouring half at a time, refreshing with pool water in between for even distribution.
Thank you very much for reading the post. I do hope you found it informative and helpful.
